tools of light

Plasterite 1

Fabrication

How to make plaster based Orgonite ?

The basic way

WATER1200ML  / 1.2 Liter
PLASTER1 Liter
QUARZ SAND     ( natural Beach Sand *)250 ml
SALT ( natural / organic )1 Table spoon
  • Note : if you use beach sand the salt is already present so you can skip adding salt.

This basic concept can be influenced by adding other materials that increase or change the energy output.These enhancers can be used but without enhancers the life force energy will be activated just as well.In other words one is free to choose enhancers if one feels the need to do so.Over time some good enhancers have come up to the surface and passed the test.

Rock Crystals1 crystal or more
Sea Weed1 Table spoon
Zeolite Powder1 or… Table spoons
GemstonesUse cheap and small gemstones
Rose Quartz1 or more
Sea Shells  ( with a chamber)Plenty
Quartz Stones/Pebbles1 or more

Recipe – Ingredients/proportions.

1 litre of water – including a quantity of water that has been energised by leaving it in the sun with crystals in it for a number of hours. Or you can use ordinary water and add some crystals or crystal powder. Possibly not as effective and not as economical, with the energised water the crystal energy is spread through the totality of the water.
1.5 liter of Plaster of Paris 
150-250 mls sand i.e. beach sand or builder’s sand.
1 tablespoon natural salt e.g. Himalayan salt 
Strong intentions
Tools:
Bucket or basin for mixing.
Moulds, lightly oiled if other than silicone. 
1 or 2 litre measuring jugs.
Whisk to stir.
Method:

Before you start,don’t forget that selenite is a substance with a certain awareness. Also have considered what you are going to use as your intentions while stirring the mixture.
My regular intentions are:
Wishing for the Greatest Good of All
Divine Light
Unconditional Love
Blue Skies
An end to chemtrails
I ask for the selenite to remember the vibrations of chemtrails so it can latch onto them very quickly. I also ask for Selenite to connect to all the Selenite all over the world. Thus even a small piece will be very powerful.
Calculate what quantity you want to make. Have your moulds already oiled. Best to have your Plaster of Paris and sand measured out. If you have lots of crystal energized water you can use it ‘neat’. If not, use about one cupful into 3 or 4 litres of ordinary water. This water will take on the crystal energy. Dissolve the salt in some warm or hot water and make up to the required amount with the crystal water/plain water.
Pour in the Plaster of Paris and let it soak in the water for a minute or two while thinking/saying your intentions. Then stir or whisk gently till smooth. Quickly add in the sand and stir till mixed in. Without delay pour into moulds.
If pouring a lot, pour into the smaller moulds first, as the mix will thicken up very quickly. This is particularly the case when pouring into bottles, probably better to make a rather watery mixture in this case. For bigger pieces, i.e. cones, try to be patient and wait for at least a day before unmoulding.For smaller pieces they have usually hardened up very quickly.If you want to paint them, please let them dry out for several days, as a lot of evaporation has to take place. They can be dried in the oven for some hours at 90 degrees or less.If you are pouring Selenite into bottles for gifting into water, leave them with the tops off for at least 3 days before putting caps on.

For gifting outside, in the countryside for example, I usually put the pieces into plastic bags loosely tied at the top, to stop them getting wet.You can add seashells (spiral type for the Phi effect), small pine cones, essences and essential oils.
The most powerful thing you can make is a Blue Sky Broadcaster, where you make a large cone or other shape, and wrap it with a (20 meter ) heavy electric extension cable Put a plug at either end, one to attach to an appliance that is preferably left on all the time, the other into a socket. This enables the positive Life Force Energy to flow back into the electric grid and harmonize the whole area.

What is Plasterite?
Plasterite is a tool to protect you and your family from the harmful energy emitted by computers, TVs, cell phones, cell phone towers, wifi, smart meters, etc. It pulls in and transforms these frequencies into a different form of energy (also known as chi, prana, orgonite or life force energy) that is very beneficial to people, pets, and plants. Plasterite is a substance made of non-toxic ingredients: plaster of Paris, sand, crystals, Himalayan salt, and crystal-infused water. I also include essential oils, zeolite, bentonite clay, spirulina, azomite, and powdered kelp. These extra ingredients are chosen for their healing and cleansing properties. After everything is mixed together, I pour it into molds where it hardens rapidly and forms a crystalline structure.
Benefits of plasterite:
The effects of plasterite differ from person to person. Commonly reported effects are:
• Better sleep and vivid dreams; frequently remedies insomnia and chronic nightmares
• Balanced, happier moods; relief from depression and anxiety
• Promotes plant growth
• Cleans stagnant and negative energy
• Deepens meditation
• Strengthens intentions and visualizations
• Brings joy to children
Frequently Asked Questions
Where should I put my plasterite pieces?
Near any electronic device: by your computer, near your cell phone (especially if you leave it by your bed at night), near your wifi, in your car (to protect you both from the electronic systems of your car and the many cell phone towers you drive by), in your fridge (you may find that your food stays fresh longer), and on your nightstand.
Is it OK to paint plasterite?
What do you paint it with?
My energy-sensitive friends report that paint modifies the energy of plasterite. It still works, but it is more subdued. Painted pieces are still beneficial and functional! I paint my pieces either with nontoxic acrylic paint or watercolor. Plasterite makes a wonderful 3-D canvas for watercolor paints!
How do you know that plasterite works?
Though invisible to us, there is an energetic cleansing and exchange that takes place in plasterite. Much like a box of baking soda pulls out and neutralizes odors in a refrigerator, plasterite pulls in and neutralizes harmful energy from electronics. There are unfortunately no scientific tools that measure life force energy! This is an energy that is better understood from a quantum physics perspective, a discipline which is still unfolding to the world. Instead, we rely on testimonials and reports from people who are sensitive to the energy of crystals. They describe the energy of plasterite as a cool, smooth, calming feeling that spreads slowly through their body. Plasterite is a reconstituted crystal; it has crystalline energy in a matrix similar to quartz (which is used in computer chips, radios, and more).
Plasterite is made out of many different gemstones, minerals, and millions of gypsum crystals that are created as the plaster sets (plaster of Paris is a powdered gypsum, a form of the gemstone selenite). Plasterite contains trillions of tiny cavities (formed when the water in its matrix evaporates), and energy resonates in each cavity.
Will plasterite ever wear out or become filled up with negative energy from electronics?
No. It is self-cleansing and will continue to function forever.
There is sand in plasterite, which is mainly composed of quartz (which is also self-cleansing); this is why it doesn’t need cleansing the way some crystals do.

Frequently Asked Questions

Fortes et Veritas

It does not require many words to speak the truth.

Chief Joseph
What is plasterite ?
Plasterite is a healing technique made from cheap and natural ingredients in order to create an abundance of Life Force Energy ( Chi, Prana, Orgone, Vril,Aether.. etc.)
It is versatile indeed and can be used for many positive purposes. Mainly, nowadays, it is an efficient method to employ against the effects of Geo-Engineering.
Plasterite devices help make the skies blue again, clean, and gives back beautiful natural clouds, harmonic effect,etc. to your neighbourhood.
Plasterite uses only natural, safe and non-toxic ingredients and is therefore more in tune with nature.
The results are greater when using this method particular compared to the artificial resin/metal orgonite protocol.
what is in Plasterite ?
• Water
• Himalayan Rock Salt & or Sea Salt (The salt kick-starts    the whole energy exchange process, interacting with      the plaster of Paris / Selenite)
• Plaster of Paris ( = gypsum = selenite)
• (beach) Sand with minerals, or fine sand bought in a      shop is also good
• (optional) Crystals … Basically anything you want to        have broadcasted that is beneficial. Be creative and        leave the cat alone.
How do I make my own Plasterite?
Mix the ingredients in a container or bucket for larger amounts, first water, than salt, than plaster, than lastly sand. Use a whisk ideally to make sure the ingredients are nicely ‘whipped up.’
The consistency should be somewhat like cream once ready to use, not too thick and not too runny. You now simply pour the mix it into a mold and perhaps put a crystal in the centre, ideally with an intention in mid of what you wish to accomplish through the power of positive intention. That´s it. Incredibly simple and rewarding on a scale it is hard to relay!
Ask nature improve the good energy level in your surroundings. If you use a mold you can put some oil in it first so it gets out more easily later on. This is usually necessary with silicon molds.
Instead of a real crystal you can use cheap crystal powders, which works great, or you can put crystals in the water first and then just use the ‘charged’ water, similar to homeopathic medicine in some ways. Essentially the water will have a similar effect as if the crystals themselves were added into the mix. The benefit being, you can keep the crystals and reuse them indefinitely. This seems to work just as well. Some other ingredients are beneficial but not essential like seashells, pine cones, seaweed, zeolite, etc. etc.
What does it cost ?
Almost nothing. Even very large devices are not expensive to make.
What rewards can I expect from making my own Plasterite ?
Removing chemtrails, helping nice natural weather return, etc. but it also positively affects people, animals, plants, indeed any lifeforms in a positive manner. Things will change.
You have to try it for yourself to understand. You can’t learn it all out of a book, you must experience it. It is like dowsing it works but cannot be explained in an easy way.
How to protect Plasterite?
You can paint them, use shellac, etc, be creative. You can also pour the mix into other containers such as empty bottles, jars, anything you can close to keep the elements out. (the energy still goes far and wide)
Why have most people never heard of it ?
There is no money involved with the production of Plasterite which is the main reason it is still not widely known about.
Nonetheless word is now spreading and people are having huge successes by getting involved.
How long has plasterite been around ?
A long time, however the knowledge was rediscovered several years ago by open minded individuals who wanted to test it out, to see how it works. This process  has been saved.
Is Plasterite just as strong as a an Orgonite Chembuster ?
In fact they appear to be even stronger since they give off a higher vibrational healing frequency, typically promoting the healing of the three higher chakras.
Also the selenite cannot be effected by “them” unlike the metal resin constructs made in the past.
What is a Blue Sky Broadcaster (BSB) ?
A method consisting of wrapping a long electric extension cord around a tool of light, ideally a fairly large piece of plasterite and put an electric device, for example a lamp on one end of the extension cord which wraps around and around the healing device and connect the other side to the grid via the plug.
Wrapping the whole thing with tape keeps it together nicely.
This is a very powerful method since it appears to send the healing energy to the whole electricity grid locally.
Yes you will have your private helicopter very soon…
I have been told this is all a hoax/scam ?
In fact it seems you cannot think for yourself. That is truly sad to say. We feel sorry for those sad souls.
People are naturally skeptical, but with Plasterite the proof is in the pudding. You will almost certainly feel a HUGE effect of uplifting energy from making plasterite, especially if you are sensitive to energies.
It can even be a little overwhelming at times since it is so powerful.
Some people who make money from making conventional orgonite believe this is false information setting out to detract from orgonite, i.e. counter-intelligence, but this is 100% untrue. All truth is hate speech now.
Can I use other natural ingredients like healing essential oils ?
Yes, of course you can. This is a great addition which adds to the effect and smells great!
Throw in anything that you feel is good to be radiated, mothers in Law, ex partners, tax collectors.. not excluded.
Herbs, oils, and last but not least , good intentions, your goals on what you are trying to accomplish with it ( give it direction )
…..The future of plasterite ?
In the hands of the individual, i.e. you!
The more people who join in and start making their own Plasterite the better it is for us all collectively ( not in a communistic fashion though …)
Recipes, Ideal Ingredient Ratios & Formulas
  The most basic recipe Ingredients;
• WATER
• PLASTER
• SALT 2 large table spoons
• SAND about 25 % of total mixWater and plaster in equal amounts, add a bit of extra water for convenience.

More advanced recipes may include the following added to the mix;
• Crystals, Crystal Gravel etc.
• Semi Precious Gems
• Sea Shells, Pine Cones
• Sea Weed
• Zeolite
and othernatural ingredient that enhance especially those from the Sea/Ocean. If you do not have crystals use just mixed sand or quartz stones…etc…
Anything natural with the Phi ratio will help enhance results.
The power of using Plasterite is incredible, and results are profound.
Blessings should you decide to get involved!
Happy stirring / pouring! ????

What is Gifting ?
Making these tools of light and putting them all over the place, especially close to nefarious places of any sort.
It is also great to give them to people you know, friends, family or even strangers.
Many will feel the energy when the devices are held and can use them when they feel an uplift in their spirits is needed.

Plaster orgonite

Postby josh on Sat May 29, 2010 4:03 pm

I thought it would be a good thing to start a new thread with the plaster, it may grow out the welcome post.
Anyone desiring to look at the beginning of the plaster may go to the welcome thread.
Today, I ran some experiments with what I call the Orgonite plus (some of you have pendants made of it) versus a same shape pendant made with plaster, crushed crystals and a pinch of copper powder, (for real may be half of 1/8 of a teaspoon), I wanted same size and shape to make an honest comparison.
The people doing the testing were 6 women, all of them healers, energy workers, massage therapists two homeopathic doctors.
They did not get to look at the devices, these were put in each hand and the question to them was: “what do you feel from one versus the other as far as life energy”.
I did this without having the ladies communicating between each other, so they did not hear any of the comments that was made.
All of them felt the resin Orgonite within a few seconds as an electrical energy, some said strong energy.
After a few more seconds, there was a raising of the eye brows and a new awareness coming to consciousness: they started feeling the plaster: ” higher vibrations, in tune with the 4 upper chakras, open like a sun and vibrate in all directions”
The resin Orgonite was more in tune with the 3 lower chakras, a much more grounding sensation.
The power coming out of both were strong , initially the resin made itself known first, but in a very short time they had difficulty choosing one or the other (two chose the plaster though) and the final choice was based on individual need of grounding or desiring more energy or a connection with the subtle energy of the pendant.
All of those beautiful ladies were gathered for an Native American Ceremony.
So here we are, two different compounds, two different energies, one strong upfront, the other needing to be ” discovered” and both extremely valid as energetic,life energy devices.
If you haven’ t gone on the link I gave you to learn more about the plaster devices, please do so, make your own, it is very simple and we can share more about it on this forum.
Josh
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby josh on Sat May 29, 2010 4:27 pm

Here is the link:
http://babelfish.yahoo.com/translate_ur … =Translate
This is the original site : http://www.energiekegel.de/
Between what we have been told in our home, and this latest experiment, my lady and I feel (and she has been pushing for the plaster :roll: ) that this “plasterite” might be the next generation of devices more in tune with the new higher energies.
The cost is minimal, and it can be a whole safe and fun family project.
And ,with dowsing, we have discovered that there is no need to crush the crystals, that tumbled stones are plenty good, but they should be as small as possible ( as for making jewelry.
Have fun
Josh
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby josh on Sun May 30, 2010 9:26 am

Also since we can affect the grid and obtain a better looking sky by wrapping a electric cord around the device, we no longer have to put them outside, we can do it from the comfort of our living room, having a cup of hot chocolate
Josh
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby nepipemi on Sun May 30, 2010 10:23 am

There has been a question raised about the “plasterite” being a collector instead of a transmuter of DOR.
Just a few days ago, I read that “after they recieved a tip”, someone smashed a plaster piece they had bought a while ago because he said it was a scam or something like that. I don’t know where he got the “tip”.
Do you have any info that could shed light on this subject? The plaster would be way cool, cheap and easy to make but it seems that it is getting a bad rap. Does it indeed transmute or just a DOR collector?
Nepi
nepipemi
Posts: 45
Joined: Sat May 29, 2010 3:35 am

Re: Plaster orgonite

Postby josh on Sun May 30, 2010 11:35 am

Nepi I have had plaster Orgonite in my home as well as other families that I have made pieces for, if there was any collecting of DOR from those pieces I would have been told since I see those folks all the time and they are quite sensitive energy wise.
Another factor in the shooting down of the plaster is also the amount of business a whole lot of people would be loosing, the plaster means “self reliance”
, it means all of us can do it, the children can have fun with it an create new combination, powerful combination that we have not thought of and the kids are not allowed to have because they are too young to play with a dangerous substance such as the resin and the sharp metal shavings.
There no mystery about the plaster it is simple to make and to obtain.
Make a broadcaster with plaster and “bless” the grid and see how it feel, see how much blue sky you are able to have :D
Good luck
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby nepipemi on Sun May 30, 2010 12:32 pm

Thanks Josh, Ok, then, how do you make it so that I can try it for myself? Do I just the plaster from the craft store? Should there be metal in it, and if so, how much? How many crystals?
THanks!
nepi
nepipemi
Posts: 45
Joined: Sat May 29, 2010 3:35 am

Re: Plaster orgonite

Postby josh on Sun May 30, 2010 12:59 pm

Nepi get the regular plaster of Paris from Lows or Home Depot, get the stones from a bead store, it is good if they are small like the kind you would use on a bracelet , make the plaster with a little more water than the called for proportion (2 plaster and 1 water) put 1/3 of the plaster in the mold, put in some stones, another third, a bit more stones, and the rest with all the stones left.
Use in it a little oxides that you have, chromium oxides, copper powder, or copper sulfate, the copper powder After a week of the plaster drying, you can paint it with some shellac at that point your device will be turning a wonderful shade of light green.
More to come
Josh
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby nepipemi on Sun May 30, 2010 1:14 pm

Thank you for those instructions.
I’ve been pondering it still and wondering if plaster is gypsum and selenite is gypsum, and sheet rock is gypsum, then how is the plaster orgonite any more effective than say a piece of drywall/sheet rock or a chunk of selenite? Please don’t ban me from the forum :o :lol: :D , I’m just trying to understand how it works. :D
nepi
nepipemi
Posts: 45
Joined: Sat May 29, 2010 3:35 am

Re: Plaster orgonite

Postby josh on Sun May 30, 2010 3:52 pm

I am reading from the plaster bag: calcium sulfate hemihydrate
: calcium carbonate
:crystalline silica
Thats it :D
Josh
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby josh on Sun May 30, 2010 7:09 pm

As far as how it work, it is still a mystery to me, if you go on site of this German man: http://www.energiekegel.de/ maybe you can make sense of the language, it may have to do with the power of the full color spectrum on the molecular level, so this is what I know: I saw it, I liked it, I did it….and it worked.
Now for sure it does not work in the same way as the resin Orgonite, I feel strongly this is the next level up, and because of the testimonies of those ladies yesterday, I know I am correct.
The simplicity of those devices makes it most attractive………………..not good to put in water though :cry: , for that we must stick to the resin.
Yes I think it must be like sheet rock, unless it is a different composition for dry wall, I remember someone saying that plaster was selenite?
Josh
josh

Re: Plaster orgonite

Postby Atma on Sun May 30, 2010 7:18 pm

This has interested me since I saw it posted on warriormatrix. I will give it a go soon to test it out myself. So does the plaster create pressure when cured on the crystals?? Guess HTML does’nt work here… how do we post pics Josh? Is it possible??
>
Atma
Posts: 3
Joined: Sun May 30, 2010 7:02 pm

Re: Plaster orgonite

Postby josh on Sun May 30, 2010 8:37 pm

Yes it is possible, being a brand new site we are still polishing everything, I am going to see the web person on Tuesday and hopefully that picture problem should be resolve.
As far as the pressure on the crystals, this piezoelectric effect is getting too much press, and I feel that it is way over rated, the way Orgonite work is this;
It work just like a condenser: 2 pieces of metals with insulation in between, apply a charge, electrons get stuck/stored in between the metal within the insulator, in the condenser the metal is continuous and can be wired to receive and discharge, in the Orgonite the metal are totally self powered, receiving their charges from any EMFs in the surrendering area and sending back this EMF transformed into QI or life energy.
The metals in the condensers are a long strip, in the Orgonite they are small independent particles
The insulator in the condensers are a long strip of insulating material, in the Orgonite it is the resin that is acting as insulation
The crystals focus and amplify
In the plaster, the jury is still out, with the little that I know I do not see how it work, but I must submit to the overwhelming results: it work!!
As with other devises, I have found that we can produce this life energy without the metal and without the resin.
Good luck with your experiments
Josh

Re: Plaster orgonite

Postby Gifter on Wed Jun 02, 2010 8:49 am

Hi Josh
Wanted to try the plaster ,went to the hardware store ,4 lbs for $6.99 gosh that was high priced. Tried Wally World ,8 lbs for $5.88 now that was more like it.
Anyway was excited to get something made. Read the mixing ratio’s, come up with this is simple 1 water 2 plaster. Came up with the amount I needed and started mixing up a batch.
To make a long story short ,when I came up with the pancake type thickness I was ready to pour, went to pour and it was already thickened up where it wouldn’t pour so I added a little water to thin it out , and more water,and more water and still had to spoon it out into the mold , moved it around in the mold even adding more water to get it thin enough to add what I wanted into the matrix.
I made 3 different pours and my results were the same. Is their some secret on how to mix this stuff up without it going nuts on me???
I poured this Sunday afternoon and its still mushy ,looks like in a couple more days it might be ready to take out of the molds, if it hardens at all??
Need some pointers on how to mix this plaster stuff ??
For whatever its worth, I asked a very gifted person about the use of the plaster, answer was Great . The Gemstones,coils,crystals or whatever you put into the mix is what makes it work. That is why just plain wall board isn’t a generator of energy by itself. And yes plaster is just selenite .
Gifter
Gifter
Posts: 4
Joined: Fri May 28, 2010 6:59 am

Re: Plaster orgonite

Postby josh on Wed Jun 02, 2010 9:05 am

OK Gifter, what I have found with the plaster is that you must be fast, and I always add a little more water then what is called for, if the mix require one quart of water I will add one cup extra.
Mix it quickly, put it in the mold, halfway put some stones, pour the rest and add the rest of the stones. Do not wait, as soon as it is mix: pour it; I have had plenty of false start myself :? AS a rule it seems to harden within 10 to 20 minutes, and there is also a bit of heat generated, but not that much.
I get my plaster from one of the two Home Depot or Lows, and I am paying $27 for 25 lb, I am certain that if I go to a construction supplier I will find it in 50lb bags for not much at all.
josh
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby Gifter on Wed Jun 02, 2010 9:15 am

Thanks Josh
Will be much faster than before. So 8 lbs for $5.88 is a cheap price ( 24 lbs would be $17.64)( 32 lbs be $23.52).
So will what I made already,will it harden or is it all hopeless??
Thanks Again
Gifter
Gifter
Posts: 4
Joined: Fri May 28, 2010 6:59 am

Re: Plaster orgonite

Postby josh on Wed Jun 02, 2010 9:47 am

No not hopeless, if you have put your stones in it, you can take your failed plaster and put it in a bucket of water, it will dissolve and you can salvage your stones, Yes you found a good price, I will look around for larger quantities, and see, but so fare you did good at wally mart
josh
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby josh on Wed Jun 02, 2010 9:56 am

I just found this on line:
http://www.idealtruevalue.com/servlet/the-38762/Detail
50 LB, Bag, Diamond Interior Finish Plaster, UPC: 0 81099 00109 3.
50 LB, Bag, Diamond Interior Finish Plaster, UPC: 0 81099 00109 3.
SKU: 830299
Model 162640-RDC06
UPC 0
50 LB, Bag, Diamond Interior Finish Plaster, UPC: 0 81099 00109 3.
This item normally ships in 5-8 days
U S GYPSUM
Quantity On Hand: 19
PRICE: $7.25
Buy With Confidence. Our checkout is secured with SSL. No one ever sees your credit card information.
Quantity:
E-mail a friend about this item.
Return to Cat
I Think there may be some hardware stores around here that would have that, $ 7.25 for 50 lb wow :o :o
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby nepipemi on Wed Jun 02, 2010 10:23 am

What is the difference between plaster of Paris and interior finish plaster?
nepipemi
Posts: 45
Joined: Sat May 29, 2010 3:35 am

Re: Plaster orgonite

Postby josh on Wed Jun 02, 2010 11:18 am

I think one may be finer than the other but I shall enquirer…………….I called the White House…. they had no idea :roll:
j
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby monsoon gecko on Sat Jun 05, 2010 10:14 pm

Yo Josh….what a buzz. ! A new technique that works…in fact PUMPS. !
Got plastered and made 3 Hhg’s yesterday.
One in s/steel pyramid, large glass martini and cylinder plastic takeaway away container.
It was quite a wet mix…crystals sank to bottom…even thought it wouldn’t harden…..poured
off half cm of water that accumulated on top of moulds during hardening.
Sprayed silicon release in the pyramid and martini…all came out smoothly.Poured into another
glass and a ceramic bowl with no release agent <and no crystals ><made too much plaster > and
they came out perfectly too. <will make great pavement chalk at school Ha. >
The important thing here is , I can use all of my normal moulds safely…glass, silicone and s/steel !
Even the giant glass vase for a plaster Broadcaster.!
I must share with you my energy sensitivity…Right fom the very first Tb;s , I could feel the orgone
field. My best desciption is like a spiritual pressure to my forehead…third eye ?
I have made many devices since and each new one takes some getting used too. eg. Cb’s ,standard
and induction type..114 and underground cloud buster UCB , peacemaker PM. The last 3, I discovered on
Etheric Research Forum. I couldn’t go near the 114 for a couple of days….even brought first helicopter. !
Next was the Broadcaster and now Plaster Orgonite…I can’t believe the energy given off by these
plaster Hhg’s….very powerful orgone field…and I can make them anywhere ,anytime.
monsoon gecko
Posts: 102
Joined: Fri May 28, 2010 1:49 am

Re: Plaster orgonite

Postby monsoon gecko on Sat Jun 05, 2010 10:44 pm

continued..
I used quite a few crystals and minerals…most from previous ebay purchases., mainly strung chip beads.
The list includes : lapis lazuli. sodalite, tourmaline, kyanite, ruby chips, mica flakes, tiger eye, amethyst,
rose quartz .garnet, sugalite, hematite, forrest agate, and turquoise. Also , included was a chunky 1 inch +
smokey lemurian quartz point.
I have spent half a day hammering the rest of my stones.< of course I’ve Kept a few. >. This is for two reasons.
1. Apparently. smaller pieces and powdered work better . so now largest broken pieces 5mm.
2. I’ll be making Hhg’s with school students this week in my favourite teacup size glass moulds..actually old punchbowl set !
I want to preserve my resources. I know what kids are like…they’ll want to use more than is necessary. so this way they are limited to a pinch or two of each sample…..unbelieveable…I’m actually looking forward to going to work..Ha ha ha .
Well the spiritual pressure is still there today, though not as intense…guess I’m getting used to this strong new orgone field ! !
Thankyou Josh for sharing this new technique……OUTSTANDING !
monsoon gecko
Posts: 102
Joined: Fri May 28, 2010 1:49 am

Re: Plaster orgonite

Postby monsoon gecko on Sat Jun 05, 2010 10:48 pm

Oh , forgot to use copper powder…must remember to take to school….even stronger ? Ha..should be interesting !
monsoon gecko

Re: Plaster orgonite

Postby josh on Sun Jun 06, 2010 6:37 am

Thank you Monsoon, this is a wonderful report, it will be interesting to see what the children will do, let us hope many people pick up on the idea of making cheap, easy and powerful Orgonite :D :D :D :D
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby josh on Sun Jun 06, 2010 7:01 am

I am getting ready to make a cloud booster using a single 4 inch copper pipe in the middle, I will have to keep it under cover, though shellac woks nice on the plaster, I dont think it will work for too long in the elements
J
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby nepipemi on Sun Jun 06, 2010 1:34 pm

Oh god, this is awesome, MG! Thanks for the write up.
Regarding your sensitivity, have you ever made or been around sugar orgonite? What does it feel like comparatively?
Also, Josh, I know might defeat a couple purposes of the plaster method, but what about coating the outside of the plaster CB with resin or epoxy to weatherproof it?
Nepi
nepipemi
Posts: 45
Joined: Sat May 29, 2010 3:35 am

Re: Plaster orgonite

Postby josh on Sun Jun 06, 2010 4:20 pm

I shall try a coat of epoxy and see what happen
j
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby monsoon gecko on Sun Jun 06, 2010 7:02 pm

Hi Nepipemi…Never considered sugar orgonite,,,have read about it couple of times ,but info wasn’t clear,
on construction and methods….closest I’ve been was munching on a toffee apple ! Ha ha
I have some brown and black oxides buried away somewhere from old pottery days…..these were used to paint,
colour, patterns on unfired pottery pieces….I’ll take to school so kids can decorate there plaster Hhg’s…should
look great and add their own personal touch.
Shellac….natural substance ? From memory I used this to French polish a wooden jewelery box at school. Came out with glass
finish..got an A…but that was 40 odd years ago. Is this the stuff that comes in flakes and you dissolve with something ?
Can,t remember . How many coats? Also , how long after making does plaster take to be dry enough to shellac ?
The paper my Hhg’s are sitting on still seems damp. I have 2 days with students so looks like not enough time to dry,
paint and shellac .
More info appreciated… Thanks
monsoon gecko
Posts: 102
Joined: Fri May 28, 2010 1:49 am

Re: Plaster orgonite

Postby josh on Sun Jun 06, 2010 8:36 pm

Hello MG
The shellac drys in a minute, the first coat will disappear quickly in the dried plaster, and to see the shine you will have to coat it about thee times.
The shellac is natural, it is made with bugs :o , I like it since it dry so fast, it will come in different weight, called 30 lb or 40 lb cut, and this has to do with the amount of dissolved bug material in a solvent, I have not seen it in powder form to be dissolved, all I can get is the already prepared mixture.
So You should be able to get the children to use it, also if it is hot where you are, by the time you finish the second side of your HHG, the first one will be dry, so basically you can shellac the whole device and keep on going for a second coat without stoping.
I am most interested in what the children will say :D :D :D
IMPORTANT: after you use brushes with shellac, it will clean spotless with ammonia, even if you forget a brush and do it the day after
josh
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby josh on Sun Jun 06, 2010 8:57 pm

Forgot; depending on the size of your plaster pieces the drying time will vary , some of the larger one : cone 8 inches in bottom 3 inches at the top and 18 inches tall will take a week to dry before shellac, an HHG may take a day or two depending how hot the environement. this may be the only draw back with the plaster, you can demold them rather quickly (much quicker than resin), but it will stay moist for a while, but the results in the quality of the energies is worth the wait :o :o
josh

Re: Plaster orgonite

Postby monsoon gecko on Tue Jun 08, 2010 7:59 am

Thanks for info Josh,
Picked up some orange shellac flakes and mineral turpentine < I think..left at school >..has
instructions,,,will find out tomorrow.
Today was great. Students responsive. They are quite energy sensitive having played with
quartz, tourmaline and shiva stones etc….can operate pendulum and divine water…I gifted them
pocket orgonites last Christmas.
So we’re going to make plaster orgonite today……eyes lit up . ha
.ground rules set , each student collected 3 pieces each
of 19 samples in takeaway containers , plus a small hermiker quartz.
The Hhg moulds are teacup size ,old solid glass…a couple of old punchbowl sets.
The extras from previous list were : shungite, adventurine, quartz chips , red coral and
I remembered the copper powder..each batch of plaster had t/spoon .
So after a demo, students made and mainly poured their own in groups of 4. Had to help
couple of times…..They came out very smooth and students reported feeling energy while holding.
Painting tomorrow…Should be interesting.. might try some diff, moulds.
S
Don’t think will be dry enough to shellac,..we’ll see.
monsoon gecko
Posts: 102
Joined: Fri May 28, 2010 1:49 am

Re: Plaster orgonite

Postby monsoon gecko on Wed Jun 09, 2010 7:49 pm

So.. arrive at school next day..staff seem happy as usual,
but noted higher energy…the students were zooming around
playing happily together….not your normal layed back, slow
start morning !
Class work surprised me as All students participated with
enthusiasm. The day flew past and they went home smiling and
chatting…. WOW..impressive.
This was a real eye opener…..the school is already well gifted
with Tb’s in classrooms, office and buried in gardens…..but
today there was a much higher energy factor that stood out.
The PlasterOrgonite was still damp a day later,,we played with
them for a while…most confirmed feeling energy while held..
couple didn’t.. I demonstrated oxide painting…tricky and fiddley.
No room for error as oxide soaked in straight away and smudged
on touch….the shellac flakes refused to dissolve. metho, not turps..!
So we made more plaster orgonite.! ! ha ha
In fact, I really wanted to trial my silicone moulds…trays of flat top
pyramids, hearts and stars.Tb size. Students loved collecting the samples
again and proficiantly made and poured the plaster with the small
amount of copper powder.
They came out beautifully….smooth as..with a hint of coloured
minerals showing through.
So school holidays coming up.. won’t see them till next term.
I wonder if their homes will glow as much as the school did ?
Next trial…a large Plaster Broadcaster…..no bucket of water.!
Enjoy.
monsoon gecko
Posts: 102
Joined: Fri May 28, 2010 1:49 am

Re: Plaster orgonite

Postby monsoon gecko on Fri Jun 11, 2010 2:36 am

Here,s some photos…..if they come out !!
http://s814.photobucket.com/albums/zz63 … %20Trials/
monsoon gecko
Posts: 102
Joined: Fri May 28, 2010 1:49 am

Re: Plaster orgonite

Postby josh on Fri Jun 11, 2010 9:51 am

Hey MG, this is good, how do you manage teaching about Orgonite in a school, I thought for sure this would never be allowed, this is wonderful indeed, those kids will never forget. I wanted to share something here for experiment: On a long extension cord, put and wrap a device at the beginning of the electric cord and 10 or 15 feet further do the same, So you will have on the same cord TWO devices 10 to 15 feet ( 3 1/2 to 4 meters) apart, I have been doing that and I think it is more effective in broadcasting.
Plaster or resin no mattter 
male plug_________X__________________________________X__________female side
——————– device———–10/15 feet—————–device
This is the one-two punch :D
Josh
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby nepipemi on Fri Jun 11, 2010 10:07 am

Josh,
next you will be wanting us to make a flexible rubber orgonite paint to coat the entirety of the electric cord!
Hey, wait a minute! :idea: :shock:
Does silicone qualify as a chemically organic substance?
nepipemi
Posts: 45
Joined: Sat May 29, 2010 3:35 am

Re: Plaster orgonite

Postby josh on Fri Jun 11, 2010 2:49 pm

Hummmmm, now that you mention it……
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby monsoon gecko on Sat Jun 12, 2010 10:40 pm

Plaster Orgonite Broadcaster
Here.s my photobucket essay….Enjoy
Oh…do I need as much quartz as in resin model ?
My guess is……can’t hurt…especially considering this size.
Comments appreciated.
http://s814.photobucket.com/albums/zz63 … r%20Trial/
monsoon gecko
Posts: 102
Joined: Fri May 28, 2010 1:49 am

Re: Plaster orgonite

Postby josh on Mon Jun 14, 2010 2:38 pm

MG I think you need as much ‘crystal powder’ for the plaster, I know That is what I do and it seems to work well.
Here a few more pictures
Here is ‘cake’ :D
Image
Here is a large cone HHG
Image
Image
Here is the table center piece, two cake model
Image
Image
More coming soon
j
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby josh on Wed Jun 16, 2010 9:28 pm

Alright people, this is the translated link from the German to English, about the gentleman making Plaster “orgonite”
http://babelfish.yahoo.com/translate_ur … =Translate
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby Spirit Walker on Sat Jun 19, 2010 11:51 pm

Aho Brother Josh!! Thank you for guiding me to this new matrix for the creation of energy toys! After viewing the German website, I instantly fell in love with the energy they were producing.
Today after running around with kids, I finally checked sources for plaster, found my Home Depot had a 20lb bag for 16 bucks, so bought that a some shellac to finish with when dried. I think I messed up on the first one, the glass I used appeared to be cylindrical, but now I’m thinking the lip slightly curves in, so will see soon! LOL Worse case I brake this glass to get it out. I did spray and smear Pam on inside of glass prior to pouring in mix.
I made more mix than needed, so scrambled and filled a large coffee mug and finally a paper cup, 4oz I think. That last I took one of my oldest muffins and filled bottom of cup first, slide muffin in and pressed down until it surged up and over it, then filled more till ran out. :)
I got creative on the mix itself. The plaster got mixed with some red pepper and lots of cinnamon, with a dash of garlic. Also one cap full of crushed/powder mixed crystals. Water came from charged water reservoir I have accumulated from various forms of natural water charging, and one mixed with plaster, I discovered I put too much water in… OOPS. Was way to watery. Threw in pinch of magnesium oil and stirred, added more fresh plaster and stirred, after pouring into mold and adding variety of small gems, garnet, green adventurine, and peridot, with quartz crystal (4) surrounding a cut bamboo length in middle. Added more plaster to cover top of bamboo, then added more of the above gems, then covered them with more plaster.
I put in front of my room air cleaner that has a Himalayan Salt Crystal Lamp on top, and produces it’s own ion mix to clean the air, so as they sat in front of that, the last ingredient was a few drops to each of Nag Champa oil. Yum! :)
They appear to all be dry, will wait till tomorrow to see about removing one. Room smells great. One in glass appears to have a mocha color to it, very nice.
I got a lot more plaster and water out the wha zoo, so my father’s day gift will be making some with kids tomorrow afternoon. I’m going to pull out the brass heart and use that! Maybe the big dolphin for myself… :)
Aho!
Tony
Spirit Walker

Re: Plaster orgonite

Postby josh on Sun Jun 20, 2010 10:34 am

Thank you Tony
This is quite a mix a look like a recipe for something to eat, it reminded me that in the early days of Orgonite Don Croft would put hot pepper in his Orgonite, so as a good follower I did as well, he may still do it for all I know.
Yesterday I also poured three devices, one of them is a safety street cone (big red thing) and this took one 25 lb bags, and also two very beautiful large and tall glass vases, both of them were filled with cracks within minutes of filling with the Plaster, I do not know why, may be very cheap glass, anyway both also took one 25 lb bags, I de molded the rubber cone late last night, and I will do the glass in the next hour
I shall take pictures and post :D :D
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby josh on Sun Jun 20, 2010 7:33 pm

Here are some new pictures of yesterday’s pouring of cones and some other older ” creations” :lol:
The large cones are 27″ tall
Image
Image
Image
Image
Image
Image
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby orgone donor on Mon Jun 21, 2010 5:51 am

All the plaster pics look really great. Am going to try some plaster orgone when my crystals arrive. (also the plaster appeals more to my budget !!)
Question: will painting the plaster piece have an effect on the energy? I was thinking they would look really cool painted with sparkly rainbow coloured paints, but if the energy is optimal without paint, I will leave them be.
Also, do you still put in main quartz like with resin orgonite, with the positive terminated end pointing upwards?
One more: I don’t have any copper powder yet, would it be okay to mix in some fine bronze shavings in the plaster mix instead? .
PS. My first ever resin orgonite TBs are curing right now. the journey has begun. :D
orgone donor
Posts: 2
Joined: Mon Jun 07, 2010 6:13 am

Re: Plaster orgonite

Postby monsoon gecko on Mon Jun 21, 2010 9:28 am

Good one Orgone Donor….that’s excellent news, just keep making more….you’ll
be surprised at how quickly they get used up gifting…friends , places , towers,
swarf suppiers, lecturers….ha, ha ..etc.
Questions,,,not sure.. I like an upright quartz in the middle, but at school, kids just
throw in a little hermiker…still seems to work ok.
Apparently , works without metal powder too…will leave those up to Josh to answer.Let the gifting begin….enjoy !
monsoon gecko
Posts: 102
Joined: Fri May 28, 2010 1:49 am

Re: Plaster orgonite Ice Test

Postby josh on Mon Jun 21, 2010 12:45 pm

Here are the photographic results of the Ice Test with Plasterite after 12 hours in the freezer last night as well as pictures of frozen water in control jar without Plasterite
The ice cone formation is obvious….as well as the tip rising on top…..with the Plasterite covered jar
Image
Image
Image
Image
Image
Image
Image
Image
Ordinary ” landscape” of frozen water in the control jar after 12 hours in the freezer…..
Image
Image
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby josh on Mon Jun 21, 2010 1:13 pm

The plasterite that I make will not stay as shown my lady has already decided to paint them and have landscape pictures on them so yes paint them how ever you want, but no metallic paint.
AS far as the metal when I use some in it is a small amount such as a pinch of copper powder for a gallon volume, but lately I have not put any to see what would happen.
There is something of worth that was told me by Spirit Walker, if we can verify this it would show why Plasterite is working; what he said was that we probably have a gazillion microscopic air bubbles in the Plasterite, and that would translate into an infinite amount of resonant cavities :shock: :o :lol: :lol: :lol:
That is big, we shall see, I will have to break a piece and look with a microscope, I think I have one that I can hook up to my computer, given to me by a long ago friend
As soon as we have painted pieces I shall post them
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby Spirit Walker on Fri Jun 25, 2010 10:12 am

I’ve now got about 10 pieces made from the plaster, and OH MY GOD, I love them!!!!! :) I was handling my 1st attempt last night to check on the shellac job I did on it the night before (needs more, sucked it right into the plaster, can’t even tell there is shellac on it!), and just holding it and feeling it’s energy, I burst out giggling! LOL A very high, joyous energy is coming out of that little puppy!!! By palming (meaning using my palm as a sensor to measure the energy output), I could define a field extending almost 12 feet from it, and this piece was made in a small glass tumbler, so it is not big. The more I became sensitized to the energy, the more uplifted I felt from being inundated with it!!
Still lots of playing to do this weekend with making more, the pieces my kids made came out fantastic as well, especially the large dolphin mold that my daughter used!!! She has some paint to decorate it as well, and is planning on many more pieces now. The blessing for me in this is that my daughter has been challenged with serious emotional issues over the last few years, and seeing her respond to the energy these creations produce is very heart warming and encouraging to me as her father. I truly believe that LOVE can manifest in a myriad of ways, and that working with these diverse elements to create/attract/broadcast Life Force Energy is a sacred and joyous undertaking.
AHO!!
Tony
Spirit Walker
Posts: 41
Joined: Fri May 28, 2010 9:43 pm

Re: Plaster orgonite

Postby josh on Fri Jun 25, 2010 9:10 pm

This Plasterite cone got the ” treatment” from my lady :D
Image
josh
Posts: 194
Joined: Thu May 27, 2010 7:10 pm

Re: Plaster orgonite

Postby Steve on Fri Jun 25, 2010 10:09 pm

Wow! That piece should be in an art gallery. Nice Work!
Steve
Steve
Posts: 33
Joined: Tue Jun 01, 2010 1:58 pm

Re: Plaster orgonite

Postby josh on Fri Jun 25, 2010 11:18 pm

:D :D :D :D That piece is 18″ tall and sings very nicely, next come the 27″ will shall see what she will do with it, Steve this is so easy make some and see how it feel, guaranty you will like it…..and the way it broadcast :o :o :o :o :o
josh