Plaster Orgonite

[Josh]

Hello Renjit Yes the mix for the Plasterite is correct, of late I have been mixing only quartz sand in the mix and it seems to work as well, as well as Orgonite the quartz sand has been one of my ingredient in it: the energies are good.
It has been one of my effort to trust Nature to give me what is needed to accomplish the goal of purification of energies in the environment, so all is becoming more and more simplified, for over a year now, I have been working with the hats of acorns, I found them to be natural amplifiers, I have made some devices with Orgonite, Plasterite, Pillows with as much acorn hats that I could put in, and found the broadcasting much improved, I am certain there are much surrounding each of us that could be used for the work we are doing.
Josh

[monsoon gecko]

by monsoon gecko » Wed Oct 19, 2011 4:44 am

G;day again, I figured as I’d be away for a while, it would be nice to let a couple of my big pieces off the leash outside, instead of being wasted in my metal shed, but needed weatherproofing.. So set up the radionics plates, with a cone on top and liberally painted the outer layer with a couple of layers of resin.

This piece had alternate layers, the thinner ones loaded with paramagnetic rock chips, the thicker disks each had a triangle of quartz points plus beach sand. Iv’e posted more detail before, but the unit felt quite happy out in the sunshine . The next piece was the first extra-large cone…( see previous post ) and was loaded with high energy , synergy of 12 combo in the top third ( from the Book of Stones ) .Also had a huge quartz point in the centre , seashells , a few other goodie plus some copper powder. Wasn’t aware of the bonus of sand in those days. As soon as the resin hit the plaster,it turned green, due to the copper powder. …mmm, I thought…camoflague ?

Anyway , it got two seperate coats of resin and has found a home sitting in a pretty rockery, surrounded by seashells , picture rocks and lush plants next to the family pool. Before I placed it, I sat it next to the owner and said put your hand on this and tell me what you feel. She immmediately picked up the deep vibration…so much more than a tingle of holding an orgonite.. Well , I think it too will be happier now, working with the elementals and charging the area.

Enjoy

 

[Josh]

by josh » Wed Oct 19, 2011 1:31 pm

Stephen my friend, that’s the way to go, love that radionic one, I am certain not to many chemtrails staying are in your area Have you return home from your trip? Josh
josh

[monsoon gecko]

Good one guys… a coat or two of resin certainly makes these beauties weather proof..Painted the same cone on the radionic plates last year and sat it on a wire bench. Didn’t coat the base.. Well it sat out there for months…right through cyclone Carlos and rest of dry season…brought it inside one night to check it out…a little wear on the base, the rest fine and boy was it buzzing when held… reckon they like being in the sun. Josh, not going back for some time.. staying at mates place for month or 2 then visiting parents and gifting along the way…same place as I wrote in email.. V

ery extended holiday…have a good look around… options open…. will have to pump out a few more Tb’s…near ran out of milk crate full….all good

Enjoy

[Renjit]

After getting a mold pyramid 8 inch size and a traffic cone of 40 inch height, with other materials except for the quarts crystals which was ordered by Oct 11, 2011. It seems the delivery of crystals are delayed. I lost my patience as well.

My plan is to make plasterite, 1 pyramid for my living room and one cone- for broadcasting. If beach sand and sea shells can replace crystals without much reduction in the POR conversion, I can start right now. kindly advise.

Thanks

Renjit

[Renjit]

Thank you very much Josh for your prompt advise.
Plasterite pyramid 8 inch size made with 5 no: locally purchased quartz crystals. Cracks already visible on the bottom dry surface.

Plasterite cone of 30 inch height, made with sea shells as substitute for quartz crystals. Energy can be sensed in the room.

Even though the total height of the traffic cone is 38 inches, I filled only up to 30 inches fearing that plasterite may not come out of the mold.
Now if the POR output remains same with orgonite inside the traffic cone permanently, I can fill the traffic cone to 38 inch height and leave
orgonite inside the mold as it is.

This will be a protection to the orgonite inside while broadcasting also. And for the next, traffic cones can be purchased again. Considering the saving between plasterite and orgonite resin, purchase of traffic cone is not an issue. Kindly advise.

I would like to post both the pictures to get bovis reading.

Thanks

Renjit

[Renjit]

by renjit8650 » Sat Oct 22, 2011 7:00 pm
Dear Josh,
Before purchasing the cable for broadcasting , I request you to clarify the following in order to select the cable
for coiling around the cone.
I have 2 options, connect the coil to a) fridge or b) computer.
As you know, computer requires very less power and therefore 1.5 mm2 cable is okay and fridge requires 4 mm2 cable. Here if the energy increases with increase of amps
as in the case of fridge, I will connect it to the fridge or else I will settle with computer power cable, which is very much easy for me.
Kindly advise. Thanks
Renjit

[Josh]

by josh » Sun Oct 23, 2011 3:38 am

The wraps that are around Plasterite in my house are around every possible electric using appliances that I could find, Fridge, lights, Lots of lights, telephone line, internet cable, power cable to the aquarium, main power source into the house, hot water heater, washing machine,
dryer, everything you can think of putting Plasterite: I did it
So now you have made one Plasterite, but soon since you have seen how easy it is, you will have it all over your place, you will notice how the :broadcasting will
change your environment
Good luck
Josh

[Author]

Posts