Plaster Orgonite

[sacred]

I thought I’d already posted somewhere that the orgonite I made with the paramagnetic rock really rocks! 
have taken some photos, but won’t be able to get them posted up here ’til later in the week, or maybe a tad later …

question, Stephen …. you mentioned that you’d put Nag Champa oil in with a plasterite mix you made, and that it was quite strong …
can you still smell it now?
does it subside when the plasterite’s wet, and come out again when it’s drying?
just something I wondered ….

[monsoon gecko]

hi, Sacred..unfortuneatly, the nag champa fragrence only lasts a week of two..bit longer for bigger pieces.
Discovered it here on this forum…Thanks whoever posted about it.
Glad you like the paramagnetic rock chips ..next pour, I’m going to overload some Tb’s and a Hhg with it …trial.

ylphs been abundant last few days.. On the weekend, created mini ley line by gifting 26 kilometers of
Hightension power lines…1 Tb/ kilometer….next day a long thin stormline travelled same route, then veered toward powerstation….no coincidence there ! !
Mate, this gifting caper’s addictive.. just love seeing confirmations

[monsoon gecko]

hi, Sacred..unfortuneatly, the nag champa fragrence only lasts a week of two..bit longer for bigger pieces.
Discovered it here on this forum…Thanks whoever posted about it.
Glad you like the paramagnetic rock chips ..next pour, I’m going to overload some Tb’s and a Hhg with it …trial.

ylphs been abundant last few days.. On the weekend, created mini ley line by gifting 26 kilometers of
Hightension power lines…1 Tb/ kilometer….next day a long thin stormline travelled same route, then veered toward powerstation….no coincidence there ! !
Mate, this gifting caper’s addictive.. just love seeing confirmations

[monsoon gecko]

Here’s latest Christmas treat for students at school…. for them to gift as xmas presents.
These too had nag champa as they like the fragrence..Only the teacup Hhg’s had crystals, shells
and quartz..personal for them to keep.
The rest only contain salt, beachsand and nag champa.

Well, they are getting better at making these !

On another note, the plaster radionic device gives the most amazing quality water.

Really leaves a zing on the palate for some time later…..delicious..great nightcap at bed time after a few beers etc.

Enjoy

[monsoon gecko]

Yo…..here’s my ice experiments with plasterite.
Don’t know how valid it is as the freezer has had 4 orgonite pieces in it since new. However. took them out to
try the plasterite tetrahedrons (triangle Pyramid)…they lost their points demoulding but still work fine .

The ice seemed to take longer to freeze…over 24 hours…mmm.

This next one shows the ice split in half, just before going in bourbon and coke…ha ha

Enjoy

[Josh]

Stephen! good work
I have experience the same: the water in the quart jar did not freeze even after being in the freezer for 10 hours, I use two large Plasterite TBs on each side of the jar.
The hair/needles like structures in the water is most beautiful
I shall post pictures as soon as I can remember how to do it  
Josh

[Josh]

by josh » Sun Oct 16, 2011 5:48 am
Hello Renjit

First, Plasterite and Orgonite are two very different animals, they do not work on the same principal;

Orgonite function more as capacitor than as a piezo electric from the compression of the crystal by the resin, I think that this compression story is just that: a story trying to think of a way the Orgonite is working and not knowing.

The Orgonite is a static condenser (works by itself), the metal accumulate a charge from existing environmental EMF, get saturated, brings all the energy to zero point and broadcast it back as Chi, and do it again and again, but only to a point, many of us have seen where the Orgonite was not working at all where EMF were very strong, such as an “smart meter” or living too close to a cell phone tower. Don Croft explained some 10 years ago that the towers were only working at 15% capacity, that may be true and that may be why the Orgonite is working around the towers, but if and when they turn those towers to 100%, I dont think the Orgonite will be doing too much.

The Plasterite works on a much higher frequency, likely involving all true colors of the spectrum, it necessitate no metal only plaster and crystals or quartz sand, it produces energy that not all people can feel, but it nevertheless will clean up the sky and do much more, beside being inexpensive, it is easy to work with, but I am not pushing anyone to do Plasterite, just know that most of the Orgonite groupies will not look kindly if you do…

You can see from the posts on this forum the many success stories that the people are having with Plasterite, make some and see for yourself what results you are getting

The Plasterite has such a fine frequency, that I would not want to mix the two, both are valid, but not in the same soup

Hope this help a little

Josh

[Edostar]

Hi Josh.

I agree than Plasterite and Orgonite are two quite different things and that for a long time;
nobody had the faintest idea how Orgonite worked.

Orgonite is actually an Inductor and not a Capacitor at all.
It simply drains off the ambient ElectroMagnetic Radiation (as you point out) and
concentrates it.

The crystal component in Orgonite is there to convert the accumulated current (EMR) into heat through ‘Electrostriction’ which is a property shared by many crystal materials (as is its converse; the Piezoelectric effect).

Orgonite with no crystal at all (as with Karl Welz’s version) does work but very weakly (or slowly if you prefer).
It converts the EMR into heat simply due to its concentration inside the Inductor matrix.

So if Orgonite doesn’t convert DOR into POR; where does the Positive ORgone in the area of an Orgonite device come from?
The natural polarity of the Etheric Field is a positive one.
This positive field is responsible for the existence and continuing good health of all life on Earth.

For this reason; all living things begin to fall ill when the etheric field is disrupted and turns negative (by the introduction of EMR for instance).
When our Orgonite drains off the EMR; the negative influence on the ehteric field is removed and it returns to its positive state.
This gives the understandable but mistaken impression that Orgonite is directly converting DOR into POR.

I’m afraid that these comments are a little misplaced in a Plasterite thread but I felt that they
might be helpful in the circumstances.

Although I have conducted a series of experiments into Orgonite (which resulted in determining the above) I have done no such experimentation into Plasterite. All the best.

Dan.

[Josh]

by josh » Sun Oct 16, 2011 12:41 pm

Wow! Thank you Dan, I was working under the wrong premisses, addressing Orgonite as a condenser, I really appreciate you taking the effort to put our feet on the right path, I feel that the more I learn and the more I see how much I do not know

Therefore the Orgonite is an “Etheric Cleaner” returning the Etheric field to normalcy , But as you may have seen, when the EMF are too strong, the Orgonite is not enough, may be it become over saturated and can no longer create the changes, even large amount of Orgonite do not appear to help, I have not experience what the Plasterite does under heavy EMF, I will have to send some to one of my customer that is severely affected with the “smart meter” device, and see How she feel with it.

Again thank you Dan, Bali is certainly a seat of great wisdom Josh

[Edostar]

Your analogy of Orgonite as an ‘etheric cleanser’ is a good one.
Filters can become overwhelmed by the sheer quantity of dirt to be removed before cleanliness is achieved and there must be a limit to how much EMR can be neutralized by any one piece of orgonite. Another factor is the frequency range of the EMR being neutralized. My first pieces of orgonite were made with cut-up stainless steel scrubbing pads and they definitely worked but not very well. I think that this was due to the fact that the spirals were far too uniform in size, shape and thickness. Better is the wide range of shapes and sizes of metal shavings that one gets from machine-
shop swarf.

Each different size, shape and thickness (and even metal type) will induct EMR of a different frequency and with varying levels of efficiency so the wider the range of sizes and shapes the better. The scrubbing pad orgonite was probably neutralizing a narrow range of EMR frequencies
very well but to the exclusion of all the other frequencies.These technical considerations are essential to making efficient orgonite but lack the magical (even mystical) aspects so often associated with orgonite and the profound effects of detailed changes in the etheric field.

These extraordinary effects are not denied in the quest for technical efficiency; they simply operate parallel to the technical considerations involved in EMR removal. When the etheric field is restored efficiently to its positive state by our little inductor/converter matrix; a powerful area of POR exists around the orgonite.

This POR field amplifies the effects of specific stones and stone combinations and can be channeled by the use of coils and terminated crystals.
These elements are not essential for the neutralization of the EMR and the restoration of the positive etheric field but they can enhance it very strongly and in magical and mysterious ways.

This area of etheric research is still wide open and cannot be addressed in purely technical terms.
It will continue to require the essential feedback from energy-sensitives that it alway has. In the absence of a technical understanding of what Plasterite is doing; energy-sensitives will be needed here too.

All the best.

Dan.

[Author]

Posts