Forums › Orgoniteplus › Devices Fabrication › New mix for orgonite ?
- This topic has 11 replies, 4 voices, and was last updated 6 months, 3 weeks ago by lightning.
- AuthorPosts
- June 1, 2024 at 7:44 am #693
About 6 month ago a costumer call me and ask if I could make a pendant that would help her arthritis, I told her That I would try, so this is what I did:
I knew that the Orgonite will amplify what ever is put in the mix.I knew that the energies of the Orgonite get modulated by the different stones we put in it
So I prepared my mix to make her a pendant : resin, metal oxide+micron size copper, and a mix of crystal powder,
Then I added one teaspoon of turmeric powder (turmeric is said to be beneficial for arthritis), the mix became a beautiful dark red color.I suspected that the Orgonite would also amplify the energy of the turmeric and broadcast it as well as the various stones.
I sent the pendant to this lady, 2 or 3 weeks later her report was that her arthritis was no longer a problem, she was very glad since she is a piano teacher.I cannot say for sure if the pendant was responsible for her well being, but may be???
From that we can apply the same method to various problem, use different herbs and see what effect they have on various problems and situations.
June 1, 2024 at 7:44 am #694josh wrote: Then I added one teaspoon of turmeric powder (turmeric is said to be beneficial for arthritis), the mix became a beautiful dark red color.
I suspected that the Orgonite would also amplify the energy of the turmeric and broadcast it as well as the various stones.
I sent the pendant to this lady, 2 or 3 weeks later her report was that her arthritis was no longer a problem, she was very glad since she is a piano teacherI cannot say for sure if the pendant was responsible for her well being, but may be???
From that we can apply the same method to various problem, use different herbs and see what
effect they have on various problems and situations.
jit makes perfectly good sense that the turmeric would work with the orgonite … good on you!
this leads me to ask this question that’s been tapping on the door of my brain ..I have some pipestone offcuts that I would like to put into a mix (when I finally am able to set myself up to do so) … but I understand the sacredness of the stone, and want to do the best
thing by it .. does anyone see any problems?no, I am not native … my ex was a pipemaker (again, not native, but given the right to make pipe) … and I have a variety of small pieces, too small for pipe .. but good medicine to have around …
I know the dust is toxic and should be avoided …
any protocol issues, or other issues I should know about? it feels right …Linda
sacredJune 1, 2024 at 7:45 am #695Pipe stone…? Is that like ,,,we smokum peace pipe ? Is it made of special material ?
Curious…I assume big deal in indian culture. I’m ready for a toke….ha ha .June 1, 2024 at 7:45 am #696The pipe stone is called ‘catlanite’ it is red and the native say it was made from the blood of our people, among the Sioux nation only the red stone is accepted, but some other native will use black stone as well .
When a Pipe is carved it is done in a sacred manner, prayers, sage burning etc.., it will take a long time to carve since most of the time primitive tools are used, and many stories are told
(wonderful stories)
As the pipe is being done, the dust from the carving will be save for later use as medicine, I have not yet seen the powder used in this way, it also will be use to make face paint .
The native say that when you pray with your pipe, what ever you pray for will happen, and after a pipe is done carving there is a ceremony to bring the spirit in it, a most powerful event!!!!!.
As you can guess I have tried just about everything in Orgonite, but never the pipe stone,please try it and see what it bring, it may bring sacredness, but much sadness as well, so be very aware of this, the pipe spirit is a very strong as powerful spirit and there is already plenty sadness in our world.
Tocsa
josh aka anpetu washte maniJune 1, 2024 at 7:45 am #697josh wrote: As you can guess I have tried just about everything in Orgonite, but never the pipe stone, please try it and see what it bring, it may bring sacredness, but much sadness as well, so be very aware of this, the pipe spirit is a very strong as powerful spirit and there is already
plenty sadness in our world. Tocsa
josh aka anpetu washte maniI hadn’t thought of the sadness that may come with it, Josh … being the blood of the people …could that be balanced with turquoise and silver?
I felt the sacredness and prayerful manner of living in balance with all our relations would be brought forth in orgonite … you feel it would bring out both the positive and ‘negative’ energies? I thought of the positive only, which is why I really wanted to run it by you .. I have pipestone dust from pipes that have been made, and have used that for aura protection and to add to medicine bags where people have been under psychic attack ..
aside from using pipestone in orgonite, would the stone be sad that it wasn’t in its home country? I have two slabs that are too narrow for pipe, offcuts from pipe made, and pipestone dust ..back to making orgonite with a small piece in it, would the energy of it be known at the time of making or afterwards, or would aspects of it present themselves in time?
energy is a delicate thing to be working with, and I want to do the best by the stone, the people, and the orgonite …
josh wrote: After a pipe is done carving there is a ceremony to bring the spirit in it, a most powerful event!!!these pieces came from the stone as a bowl was being carved … so were not part of the
awakening ceremony … that would possibly also be something to take into account …June 1, 2024 at 7:45 am #698Sacred, I will share with you what I feel and believe deeply, it is a bit off the common path but that is the way it is , I believe with all my being that all is alive with a large degree of consciousness and has the right to ask for the greatest degree of respect, and as I walk among the trees, the grass, the clouds, the winged people, the four legged, the creepy crawlies I have no problem what ever to behave toward them as if they were my close relatives, because they are, they are my relations, the grand fathers the rocks, the water, the air, the earth I walk on, all of them are wonderful friends of mine, and I do not want it any other way.
I am never alone
So for your pipe stone dust, it is your relative as well, speak to it and ask what is the best for her, will she accept to help in this way, or would she rather be in a medicine pouch,…..listen,she is conscious, and as you give this closeness, this intimate feeling to ALL that surrounds you: you will feel so elated, there is not one moment where you will not know that you are with your close family
The way I see it is that you already are a medicine woman ………………and may be I should be the one asking for advise
tocsaPS give the stone a little tobacco
June 1, 2024 at 7:46 am #699by sacred » Sat Jul 10, 2010 4:55 amthanks, Josh …the pieces that were excess as the pipe bowl emerged from the stone have been popping into my mind the more I read about orgone devices … I feel the dust is happy where it is and is to be used as it has been …
I had intended to talk with the stone after asking its ‘original keeper’ … your land and people …medicine is not something to play with lightly …
I feel a strong connection to your culture and its people, and also understand that as much as I may sense what is right, it is appropriate to ask .. especially as the pipe is traditionally carried by a man … and the bowl is the female aspect of the pipe ..josh wrote: The way I see it is that you already are a medicine woman ………………and may be
I should be the one asking for advisewe are here to learn from each other … I spent 3 years in the US and had much shared with me … and I miss a lot of that … (we will chat one day )
josh wrote:PS give the stone a little tobaccothank you … yes, it is needed …
I had thought of sage (loose Californian White Sage) and wondered whether some sage, cedar and sweetgrass would be good companions in the orgonite with the pipestone … I can see I have some connecting to do … and this has prompted more questions and pics in my mind … medicine from other beings …thank you for your input, suggestions and the like, Josh … I have to warn you that questions and answers lead to more questions!
June 1, 2024 at 7:46 am #700Sacred: if you need sage please let me know
June 1, 2024 at 7:46 am #701Linda…I would steer clear of metal moulds, especially for small pieces, Silicone is the go….gives shiney surface, never sticks and last and lasts
Comes in sheets/ trays of 12 or 15 .Google silikomart….many sites…chololate moulds ? many shapes.
I got little boat, pyramid and the round one I use for pendants and recently phone buttons.
H They have a huge range…variety of shapes.. I bought from Canada..never again $ 90 postage and over 2 months to turn up ! ! !Takes the hassle out …make many at one time of just a couple.
monsoon geckoJune 1, 2024 at 7:46 am #702ops.! I feel like I;ve jumped in looking like a know all. ! Ha ha
My explaination…All the metal moulds I’ve used have their tempermental characteristics.
mostly being a pain in the arse….Those little ones would be similar…especially if you are using epoxy resin , because it doesn.t shrink as much from my experience..at least polyester resin shrinks allowing easier removal………..Josh is quite right about the coating the moulds and releasing by time in freezer…my pyramid moulds have had the cold treatment often.
especially after a double dip session. Silicone moulds just peel off…..magic…..smooth shiney surface Glass moulds pop out with a couple of taps on a couple of thick books (absorb energy so not to break glass) ….ocassionally need freezer job, but not the norm.
Steel/metal moulds , more often than not, need slamming out…ha ha, even after freezer. !
Maybe I’m doing something wrong…technique ? Just sharing .
mmmmm…….so your tackling technical difficult, multi-layer… with expensive materials on your first Pour !!!!!!Wow , brave girl ! Would love to be there !
Seriously, you’ll get a better buzz……and a LOT of Experience …a feel for it !….. by starting simple.
For a litre of resin, you can get about 12 Tb’s or 6 Tb’s and a couple of Hhg’s.
Better to get a heap of home made energy out there and trial techniques later..may save the expensives.!
Resin can be tricky………………..yet
You may nail it first go !Have Fun..!
- AuthorPosts
- The forum ‘Devices Fabrication’ is closed to new topics and replies.