New Thoughts

[Josh]

Postby josh on Sun Sep 26, 2010 10:13 am

You can always make a thin slurry with your paramagnetic earth and a bit of plaster to keep it together, 1/2" thick disk to go in between the larger Plasterite.

Now let us look at "the past", I may be entirely wrong on this, then again...
All of those "great" culture may have stayed around for a long time, but they were still under the slave/master relationship and they eventually failed; the use of the higher technology was for privilege few, in truth it might have help with the crops, but it was mostly for the use of the Illuminati of the day.


So what they did at the time did not not bring a lasting peace or an enlighten behavior, therefore our medicine must be different, we may use some of their technologies, but our is and will be different because our intent is different


So what is it that we are doing with all of this new ideas; we are attempting to change to frequency so that ALL of humanity finds it self in a new paradigm of healthy ethic, absolute honesty, in service to others, rather then total service to self as it has been for countless eons.
This is the why of the big and energetic devices; the further the field affect the more people are hopefully coming under the new and improved way of being. .....................I may be dreaming standing up............somebody slap me please so I wake up.


Josh

[Monsoon Gecko]

Postby monsoon gecko on Fri Oct 08, 2010 9:26 am



Well I went ahead and made 10 thin 1/2 inch plates loaded with paramagnetic rock chips...one broke in half...After drying, I stacked them to see.

They seemed quite energetic by themselves, but when placed alternating, in-between the 2 inch plates, the whole unit was noticeably stronger.
So all up, 9 x 2inch x 12inches across and then alternating 9 x1/2inch thick plates loaded with paramagnetic rock
Have not yet sourced spacers to trial an air gap between layers but eventually will test that.
Also the script is makeshift and needs to improve


Noticed after coming home from school and sitting to relax, how strongly it radiates only a couple meters away.
This has happened every time I go out.....seems stronger than the giant cones as I have not acclimatized to the energy as I have done
with the other devices...still noticeably feel it each time I walk into room...getting into 2nd week of trial.


Left a flagon of water on it overnight . It was really charged and tasted crisp and sweet......similar to pillowed water.
Layered multiple pieces really multiply energy .

Funny, I noticed one group of students at school pooling their freshly made pieces and stacking together on their desk. Didn't ring a bell at the time
but interesting on afterthought. Others just carry them around like pets........It's all entertaining...ha ha !

[Lightning]

Hi Monsoon Gecko ,

Please hear me out and try this if you want to.

Confession- I am extremely energy-sensitive and visionary, etc, etc, etc.

This is my vision:
8 layers of discs, alternating para and diamagnetic.
Above the 8 layers an airspace.
1 more disc above the airspace, with a point on one flat face, positioned to point straight upward.
Position shells in the airspace with the small ends facing outward in multiple directions (May not need the shells to work, but they will act as a venturi if present, may get you more range).

It is a tower of Light.

That's it. I will build this some day, and will post here when I do.

Namaste,

Linda

[Monsoon Gecko]

Postby monsoon gecko on Sat Oct 09, 2010 3:37 am

Thanks Linda....I'll give it a try ....have heaps of spiral pointy shells.

[Monsoon Gecko]

by monsoon gecko on Sun Oct 10, 2010 5:43 am

Radionics device progress
Yo...gifters, here's a few photos to illustrate trial so far,,,info in previous posts....
Guess it's a waste of time dowsing ? Ha ha

http://s814.photobucket.com/xxxx-link down

DSC01460.jpg (60.24 KiB) Viewed 3078 times

DSC01469.jpg (47.84 KiB) Viewed 3078 times

DSC01501.jpg (41.73 KiB) Viewed 3078 times

DSC01502.jpg (51.67 KiB) Viewed 3078 times

DSC01517.jpg (50.52 KiB) Viewed 3078 times

DSC01520.jpg (41.6 KiB) Viewed 3078 times

DSC01529.jpg (31.22 KiB) Viewed 3078 times

DSC01530.jpg (23.5 KiB) Viewed 3078 times

DSC01578.jpg (33.82 KiB) Viewed 3078 times

DSC01581.jpg (38.5 KiB) Viewed 3078 times

DSC01583.jpg (41.92 KiB) Viewed 3078 times

DSC01594.jpg (31.15 KiB) Viewed 3078 times

DSC01595.jpg (26.39 KiB) Viewed 3078 times

DSC01596.jpg (36.62 KiB) Viewed 3078 times

DSC01598.jpg (36.99 KiB) Viewed 3078 times

Comments welcome






( admin note : of course all links are down .....so I post the pics in here )

[Josh]

Postby josh on Sun Oct 10, 2010 12:22 pm

Wow Stephen, do you have to put lead shoes to be near the whole thing, nice work
What did use to separate each plate
Good medicine
j

[Monsoon Gecko]

Postby monsoon gecko on Mon Oct 11, 2010 3:12 am

Yo. ...Josh. Starting from bottom up,,Plasterite 2 inch plate with paramagnetic plate directly on top, then plastic sleeve with script......still need to work on that...then next layer, 2 inch plate , the Pm plate then sleeve , continuing up to the top. Spacers under the top plate is 3 mini Tb's with shells lined up, then top plate positioned with final cone positioned in the middle.


I used the plastic sleeves because the plaster was not completely dry, so will probabaly dump them some time. Plastic doesn,t feel right. I havenot a clue as to how well it works or in fact what I'm doing as a radionics device. But can tell you it has much stronger energy field than a large cone broadcaster...I got used to them pretty quickly...couple days. This layered device continually pumps.


I haven't even try airspace between all layers yet and as for shells in upper space, can't really tell if it improves or not.,just continually surrounded by energy all the time....hard to pick the details....maybe stronger.. not sure....thanks Linda


..after all ,each plasterite 2inch plate has a big handfull of shells and the 3 quartz points too. Like running blind full speed, but not hitting anything....exhillarating !

I have to laugh seeing Dennis on WM with his new kirlian toy stating plasterite has no life force....that's certainly not my experience......only trouble is he,s sucked all those people in.

Welcome any input, advice or ideas..... Thanks,


Stephen


Last edited by monsoon gecko on Wed Oct 13, 2010 12:49 am, edited 1 time in total.

[Josh]

Postby josh on Mon Oct 11, 2010 10:22 am

Hey Stephen, this is a good report, do you feel that the cone up top is focusing the energy, or if there is still a wide field?

Suffice to say I am gonna be at it in few days, for now I have to finish a bunch for schools,

Well it is to bad about Dennis, as I look at other Orgonite forums, I can see that anyone who want sell Orgonite can do it, but not on WM, it look to me more like a store front for his products, no matter it is still a big information center for people curious about the Orgonite
We have ample proof of the working of the Plasterite, he can say what he like about the Earth being flat; we know better
Also beware of what you say, it may get yourself banned from WM

Oh also; did you cast your Paramagnetic Earth in resin? , the one that I have is in rather large flat chunks, I have made many coasters with it, about 1 inch thick in resin, so for the layer devise I will use the same idea, but I think your PM is much stronger than the one I have,.....I am certain it will still work.
From what we can see and feel the Plasterite becomes even more active when it is painted, the bright colors are activating something
Catherine has just finished (last night at 2 AM) painting a large traffic cone titled "PEACE", will take pictures and post soon.

Have you received your parcel yet or is it detained by the post office, I send it 2 weeks ago, it look like the Gestapo is here full on



Josh

[Lightning]

Postby Lightning on Tue Oct 12, 2010 3:10 pm

Wow Stephen!

I am so impressed! Beautiful, strong work...

The point at the top is to send a vertical beam up (would be cool if there was a shell mounted into the top of the point with its small end pointing straight up), that structure pumps energy, and the shells in the top space act as venturis to all sides, so you have yourself a screaming eagle there .

If you want to remove that vertical beam function, just take the piece off the top layer and leave it flat. Leaving the point in place (if you decide to do that), it would be interesting to see if the structure will function well as a cloudbuster.

Woohoo!

Hey maybe we can get the other Steve to calibrate it? Steve, would you please?

Oh thank you Monsoon, for putting that together

Many Blessings,

Linda

[Monsoon Gecko]

Postby monsoon gecko on Wed Oct 13, 2010 7:40 am

Thanks Linda.. will hunt up larger spiral shell to try...then you mentioned cloudbuster. I thought...mmmm ..a hexagon of shells. standing vertically....think I might have to make a couple more thin plates with shells embedded vertically and try each.

Josh, parcel arrived today and yes, was delayed and opened by customs, but not a problem, unlike last time eh ?

Thank you so much... a beautiful Life Pillow...putting to good use aready....wonder if I can grow hair on top of my head ? ha ha

Paramagnetic Rock in orgonite ? Only put a few chips in pieces recently , when I remember. Just like a little bit of tourmaline, kyanite or lapis which are my favourite additives. Can't pick any diff. So you think load it into a thin plate or use in matrix of Tb etc, or both. It certainly made the plants root systems grow bigger and healthier in school seedling trials in earlier times,
So , good addition to Tb's ETC ? and how much ?